Pengam, on the outskirts of Bargoed in South Wales, is a pretty unlikely place for a car factory – but its product was a pretty unusual car. 

Deep in the Rhymney Valley landlocked by hills, eighteen tortuous miles north of Cardiff and almost as far from Ebbw Vale and Merthyr Tydfil, for years the largest colliery waste tip in Europe overshadowed Bargoed and its surroundings. 

Opened in 1897, the colliery broke the world production record in 1908 when a ten-hour shift produced 3,562 tons of coal – followed up by another new record in 1909 when a similar shift raised 4,020 tons. 

The tip is now a nature park, the mine closed in 1977, and the car factory is also long gone – but the two remain forever inextricably linked – by one of the most debilitating diseases suffered by miners who toiled long and hard in appalling conditions simply to raise much-needed coal to the surface.

The factory location springs from a time when Welsh coal was pivotal to the second world war effort. Then, increasing numbers of miners were falling victim to the serious lung disease Pneumoconiosis – blockage of lung tissue caused by some form of dust – in this case, coal dust. 

At least 5,000 Welsh miners were diagnosed by 1945, and post-war the government began introducing subsidised factories in affected areas to encourage the provision of alternative work for miners no longer able to undertake hard manual labour. 

Low rents and reduced rates were offered for employment of such workers, attracting the interest of the Austin Motor Company’s new Managing Director, Leonard Lord. Austin was then planning a new car range which would later became the “county” series – with miniaturised versions for sale as children’s pedal cars also under consideration. 

Low costs, a new factory, and a readily available labour force for the lighter work involved in making childrens’ cars rather than real ones seems likely to have appealed to Lord on both a business and a benevolence level.

A small team was formed at Longbridge tasked with urgently developing a prototype child’s car, following the “real car in miniature” principle. Its dimensions were to suit  children aged four to nine, with seating for one plus a smaller brother or sister, with working lights, opening bonnet and boot – and a dummy engine. Body styling features from production Austin models were required, including a proper grille and then-current “alligator” bonnet.

The prototype was completed in time for a surprise reveal at the “Austin Progress” Convention in June 1946, where the millionth Austin to be built would take centre stage. This first version was finished in maroon with contrasting brown bench seat, and at Leonard Lords suggestion its miniature number plate carried the legend JOY1,  because – legend has it – he said: “this car is going to give joy to many children.” 

A considerably lighter second prototype followed, with treadle rather than bicycle-style pedals: it became JOY2. After this came an alternative, rather smaller single seater called JOY3, with attractive looks in the style of the 1930’s Austin 7 twin-cam racing cars.  

JOY4 was the final prototype to emerge, combining production readiness with experience gained from engineers and plenty of youthful test drivers – and the grille and cutely rounded front end of the new, soon-to-be-launched Austin A40 Devon. 

Prior to production, the JOY3 single seater gained the Pathfinder name – which reappeared later on the full size mid-1950’s Riley saloon produced by BMC. JOY4 was renamed the Junior 40 around this time, then later changed to J40 – creating a family relationship with the A40 designation first used on the Austin Devon saloon. 

At just over 24,000sq ft including stores and offices the Bargoed factory was small by motor industry standards, but early in 1949 drawings were progressed, tooling and equipment installed and the facility structured for production as with full size vehicles. Dealers and selected high profile retailers were advised that first Pathfinder deliveries were due in early summer 1949 – following the factory’s official opening on the 5th of July. J40 “roadster” production began some months later. 

On opening, the factory employed under 100 staff, growing to around 150 by 1953, after which numbers increased more quickly.

Modest numbers of management and specialist personnel were seconded from Longbridge, but local employees generally suffered some disability, mostly forms of Pneumoconiosis.

By 1965 around 500 were employed, many of them on presswork: its reputed that 112 pressings were needed for the production version of the J40 pedal car, with 108 panels pressed on site – just four large panels came from Longbridge.

By the mid-1960’s work covered far more than the J40 – the site was turning out significant volumes of pressed steel parts for BMC’s full-size cars, ranging from original Mini door pockets to engine fans and timing chain and rocker covers.  

Perhaps surprisingly, the Austin Junior Car factory remained largely untroubled by the 1960’s BMH and BLMC mergers. The last J40 was made in September 1971: just over 32,000 examples left the factory between 1955 and 1971 on their way to entertain boys and girls in Britain and worldwide. 

Production numbers between 1949 and 1955 aren’t known, but estimates indicate perhaps 1500 were made in the period, along with 3000 Pathfinder variants. Today’s consensus is that the J40 sold for £20.0s 0d, while the Pathfinder cost £25.4s.0d (£25.20) Both types still occasionally appear for sale, attracting surprising prices at auction and there are three on sale now for between £3,000 and £5,600 in a popular classic magazine.

The factory continued making a range of vital small metal assemblies for British Leyland vehicles long after J40 production ended, surviving successive acrimonious BL shake-outs. 

Ultimately it became part of Austin Rover, living on through British Aerospace and BMW ownership of Rover Group, closing its doors for the last time in April 1999.

Slow facts: Austin J40 specification

Treadle operation by pedals.  Adjustment available for leg reach. 

Drive to right-hand rear wheel.  Adjustable handbrake. 

Pressed steel hubs with roller bearings. 

Pressed steel bodywork and steel wheels, Dunlop 12.5in x 2.5in pneumatic tyres. 

Three spoke sprung steering wheel. 

Padded seating with leathercloth upholstery. 

Dummy engine with sparking plugs and leads. 

Opening bonnet and boot. Chrome bumpers to front and rear.

Twin 4.5 volt batteries operating horn and twin headlamps and horn.

Length 5ft 3in, Width 2ft 3in Height 1ft 10in Weight 95 lbs


If you want to learn more about this fascinating piece of Welsh and UK automotive history look at: 

http://www.austinmemories.com/page66/page66.html

Highly recommend is this book: Austin Pedal Cars by David Whyley  Pub 01/11/1999

Publisher: Arthur Southern Ltd.  ISBN 9 780 946 2653 12. Paperback, 80pp.

Dave Moss
Dave Moss

Dave Moss has a lifetime connection with the world of motoring. His father was a time-served skilled engineer from an age when car repairs really meant repairs: he ran his own garage from the 1930’s to the 60’s, while Mum was the boss’s secretary at a big Austin distributor. Both worked their entire lives in the motor trade, so if motor oil’s not in Dave’s blood, its surely a very close thing.

Though qualified in Electronics, for Dave it seemed a natural step into restoring a succession of classic cars, culminating in a variety of Minis. Writing and broadcasting about these, and a widening range of motoring matters ancient and modern, gathered pace in the 1970’s and has taken over since. Topics nowadays range across the modern motoring mainstream to the offbeat and more arcane aspects of motoring history, and outlets embrace books, websites national and international magazines, newspapers, radio programmes, phone-ins and guest appearances. Spare time: hard graft on the garage floor attending to vehicles old and new. Latest projects: that 1968 Mini Cooper S has finally moved again after 30 years, and when the paint is finished, the 1960 Morris Mini 850 will also soon be ready for the road again…

Share This